Custom Design: | Accept |
---|---|
Hardness: | 44-49HRC |
Type: | Tungsten Carbide Saw Teeth for Wood Cutting |
Warranty: | None |
Product Name: | Tungsten Carbide Saw Teeth for Wood Cutting |
Size: | on Customers` Demands |
Customization: |
---|
Suppliers with verified business licenses
tungsten carbide saw teeth for wood cutting
cobalt base alloys consist of complex carbides in an alloymatrix. Their exceptional wearresistance is due mainly to the unique inherent characteristics ofthe hard carbide phase dispersed in a CoCr alloy matrix.
Saw tips are made of CoCrW12,so the following information is all about CoCrW
12.
water truck side spray,water truck spray nozzle
(1). CoCrW12 could be considered an intermediate alloy .
(2). It contains a higher fraction of hard, brittle carbides than Stellite 6
(3).It has increased resistanceto lowangle erosion, abrasion, and severe sliding wear whilstretaining reasonable impact and cavitation resistance.
(4). CoCrW12 is often used self-mated or running against .
Nominal Composition (mass %)
Br and No. | C | Mn | Si | Cr | Ni | Mo | W | Co | Fe | Othera |
Alloy 3 | 2.0-2.7 | 1 | 1 | 29-33 | 3 | -- | 11.0-14.0 | Bal. | 3 |
P.03Max S.03Max |
Alloy 6 | 0.9-.4 | 1 | 1.5 | 27-31 | 3 | 1.5 | 3.5-5.5 | Bal. | 3 |
p.04Max S.04Max |
Alloy 12 | 1.1-1.7 | 1 | 1 | 28-32 | 3 | -- | 7.0-9.5 | Bal. | 3 |
P.03Max S.03Max |
Alloy 694 | 0.8-1.2 | -- | 0.8-1.2 | 26.5-29.5 | 4.0-6.0 | -- | 18.0-20.0 | Bal. | -- | -- |
Physical Property
Item | Alloy 3 |
Alloy 6 |
Alloy 12 |
Alloy 694 |
TTG25 | TTG25 |
Blade (CFB) |
Hardness (HRC) |
51-55 | 38-44 | 44-49 | 47-51 | 57-60 | 60-63 | 46.5-50 |
Suppliers with verified business licenses